Spring Opening Checklist
Use this when the cover is coming off and you need the pool circulating, tested, cleaned, and safe to evaluate without guessing at chemicals.
- Use this when the cover is coming off and you need the pool circulating, tested, cleaned, and safe to evaluate without guessing at chemicals.
- Free Chlorine
- pH
- Total Alkalinity
- Calcium Hardness
- CYA
- Do not add shock or algaecide before the pump is running and water is circulating
- Do not skip the drain cover and equipment safety inspection
Inspect equipment and test water before adding any chemicals.
- ✕Do not add shock or algaecide before the pump is running and water is circulating
- ✕Do not skip the drain cover and equipment safety inspection
Free Chlorine / pH / Total Alkalinity / Calcium Hardness / CYA
Opening day field checklist
Take this to the pad.
Lista de apertura para imprimir
Inspeccion y seguridad
- □Confirma que las cubiertas de drenaje esten intactas y firmes
- □Inspecciona conexiones electricas y union equipotencial
- □Verifica el funcionamiento del GFCI
- □Revisa cercas, puertas y barreras
Equipo
- □Retira tapones de invierno y reinstala tapones de drenaje
- □Reconecta uniones de bomba, filtro y calentador
- □Ceba la bomba y revisa si hay fugas
- □Registra la presion limpia del filtro: ___ PSI
- □Verifica la posicion de la valvula multipuerto
- □Confirma que todas las valvulas esten en la posicion correcta
Agua
- □Llena hasta la mitad del skimmer
- □Haz funcionar la bomba 24 horas antes de analizar
- □Analiza: FC, pH, TA, CH, CYA
- □Registra los valores base de apertura
- □No agregues quimicos hasta que la bomba haya circulado 24 h
Despues de circular
- □Ajusta primero el pH si hace falta
- □Agrega la dosis inicial de cloro segun la calculadora
- □Agrega CYA si esta por debajo del objetivo
- □Espera 48 h antes de volver a medir CYA despues de agregarlo
First 15 minutes: keep cover debris out
The fastest way to make opening harder is to dump cover water and decomposed debris into the pool.
Before power: inspect stop conditions
Find winter damage while the system is still quiet and not under pressure.
Restore water level and prime
A test result is not useful until the pool can mix and the pump can move water.
Test once the water has mixed
Opening chemistry starts with a result set, not a shopping list.
Choose the branch from the evidence
A clear pool, cloudy pool, green pool, and broken circulation system should not share one checklist.
Make only the justified additions
Sequential dosing makes the next test meaningful.
First 24 hours: clean, filter, retest
The first day proves whether opening actually stabilized.
Recursos (1)
Weekly / Monthly / Quarterly Maintenance Routine Packet
A printable owner packet that turns weekly, monthly, and quarterly pool maintenance into one repeatable checklist.
Lista de apertura para imprimir
Inspeccion y seguridad
- □Confirma que las cubiertas de drenaje esten intactas y firmes
- □Inspecciona conexiones electricas y union equipotencial
- □Verifica el funcionamiento del GFCI
- □Revisa cercas, puertas y barreras
Equipo
- □Retira tapones de invierno y reinstala tapones de drenaje
- □Reconecta uniones de bomba, filtro y calentador
- □Ceba la bomba y revisa si hay fugas
- □Registra la presion limpia del filtro: ___ PSI
- □Verifica la posicion de la valvula multipuerto
- □Confirma que todas las valvulas esten en la posicion correcta
Agua
- □Llena hasta la mitad del skimmer
- □Haz funcionar la bomba 24 horas antes de analizar
- □Analiza: FC, pH, TA, CH, CYA
- □Registra los valores base de apertura
- □No agregues quimicos hasta que la bomba haya circulado 24 h
Despues de circular
- □Ajusta primero el pH si hace falta
- □Agrega la dosis inicial de cloro segun la calculadora
- □Agrega CYA si esta por debajo del objetivo
- □Espera 48 h antes de volver a medir CYA despues de agregarlo
Educational guidance only. Verify labels, manuals, local code, and site conditions before acting. Stop for electrical, gas, structural, drain, drowning, injury, emergency, or chemical-mixing risk.