컨트롤러 구성도
패널을 믿기 전에 펌프, 히터, 동결 방지 로직, 투입 명령을 누가 맡는지 기록하세요.
제어와 프로브 안내
컨트롤러, 프로브, 수질 테스트의 역할
컨트롤러는 문제의 단서를 줄 수 있지만, 실제로 무슨 일이 일어나는지 확인하려면 현장에서 직접 테스트하고 프로브를 관리해야 합니다.
로그인하여 장비 정보를 수영장에 저장
Automation and Calibration
Automation can reduce friction, but only if sensors, schedules, and freeze logic are maintained like equipment instead of magic.
Use this when
- Automation can reduce friction, but only if sensors, schedules, and freeze logic are maintained like equipment instead of magic.
You'll need
- Controller model
- Firmware version
- Pump model
- Heater model
Stop and escalate if
- Do not use ORP alone as a substitute for direct FC testing
- Do not skip manual fallback documentation
- Do not change interlocks or safety logic without the manual
먼저 할 일
Map the controller family and confirm sensors are calibrated before trusting schedules, freeze logic, or probe readings.
하지 말 것
- ✕Do not use ORP alone as a substitute for direct FC testing
- ✕Do not skip manual fallback documentation
- ✕Do not change interlocks or safety logic without the manual
준비할 것
Controller model / Firmware version / Pump model / Heater model
0%0/15 done
1
Map what the controller actually controls
Before you troubleshoot automation, know whether it is commanding pumps, chlorination, heating, valve actuators, sensors, or all of the above.
2
Probe calibration is maintenance
pH probes and similar sensors drift unless they are cleaned, calibrated, and replaced on schedule.
3
Respect ORP limits
ORP can be useful, but its interpretation gets weaker as stabilizer and real-world pool conditions complicate the chemistry.
4
Freeze protection is backup logic
Freeze mode can help in mild climates, but it is not a substitute for true winterization where outage risk or sustained freezes exist.
5
Keep manual control available
Every automated pool needs a sane manual fallback path.
자료 (17)
Owner vs pro boundaries
Use the escalation guide when automation work reaches live relays, service menus, or safety-critical freeze and heater logic.
Mixed-brand automation, heaters, and winterization
Use the mixed-brand control guide when the controller, pump, heater, valves, or chlorination are split across different equipment families.
Chemical feeders and automation interactions
Use the feeder-interaction guide when ORP, pH probes, feed commands, and pump schedules are producing unstable chemistry.
Manufacturer manuals and model-family index
Use the family index before changing schedules, freeze settings, or probe workflows on a controller.
Solar roof loop troubleshooting
Use the solar-loop guide when a controller scene or actuator is steering roof-panel flow.
Manual library
Browse the manual library when you want source documents instead of chasing vendor links.
Pool glossary and core terms
Use the glossary when automation, ORP, GFCI, or hydrostatic language needs a plain-English jump point.
Pentair IntelliCenter Control System installation guide
Current IntelliCenter install guidance and system setup reference.
Pentair IntelliConnect install guide
Install guide for the control and monitoring system.
Pentair IntelliChem manual
The manual states IntelliChem senses pH and ORP and dispenses chlorine, bromine, muriatic acid, or CO2 gas.
Hayward Omni configuration guide
The configuration guide states OmniLogic controls up to 16 variable-speed pumps and supports optional sanitization.
Hayward Omni configuration guide
The guide states OmniPL controls up to 8 variable-speed pumps and includes salt-ready model variants.
Hayward Omni configuration guide
The guide states OmniHub controls up to 3 variable-speed pumps and uses a smart relay/controller pad.
Jandy AquaLink TCX Power Center installation and operation manual
The manual covers the TCX power center and installation/operation details.
Jandy AquaLink RS control panel installation manual
The installation manual is the archived local reference for the RS control panel family.
Jandy TruSense owner's manual
The owner manual states TruSense measures pH and ORP and covers installation details.
Jandy TruDose installation and operation manual
The manual states TruDose measures pH and ORP, adds acid, and can trigger chlorination through AquaPure.
자동화 경계
일정을 기록하고, 매뉴얼로 교정하며, 눈에 보이는 하드웨어 상태를 확인하는 동안에는 자동화가 소유자에게 안전합니다. 실시간 제어 하드웨어나 이해하지 못하는 안전 로직으로 들어가는 순간 더는 안전하지 않습니다.
OWNER-SAFE
- ✓ 아무것도 바꾸기 전에 일정, 동결 설정, 컨트롤러 계열, 연결된 장비를 기록하세요.
- ✓ 새 교정액과 문서화된 컨트롤러 절차로 프로브를 교정하세요.
- ✓ 매뉴얼에 명시된 수동 오버라이드와 안전 종료 경로를 사용하세요.
PRO-ONLY
- ★ 전원이 들어간 릴레이 구획을 열거나, 액추에이터를 다시 배선하거나, 라인 전압 부하를 진단하거나, 정확한 안내 없이 히터와 동결 보호의 안전 핵심 로직을 변경하지 마세요.
- ★ 전기 테스트나 컨트롤러 보드 접근이 필요한 지속적인 센서 오류를 진단하세요.
- ★ 풀, 스파, 히터, 약품 주입기 인터록이 예측 불가하게 상호작용할 때 자동화 구조를 변경하세요.
STOP NOW
- ⚠ 동결 보호가 올바른 장비를 시작하지 않거나, 릴레이가 불규칙하게 떨리거나, 컨트롤러가 잘못된 장비에 전원을 공급하고 있습니다.
- ⚠ 다음 단계에서 전원이 들어간 패널을 열어야 하거나 안전 장치와 관련된 서비스 메뉴 옵션을 추측해야 합니다.
- ⚠ 교정 결과가 성립하지 않고 하드웨어 상태가 센서, 배선, 컨트롤러 장애를 시사합니다.
Educational guidance only. Verify labels, manuals, local code, and site conditions before acting. Stop for electrical, gas, structural, drain, drowning, injury, emergency, or chemical-mixing risk.