控制器地图
在信任面板之前，先记录泵、加热器、防冻逻辑和投药指令由谁负责。
控制和探头说明
控制器、探头与水质测试的职责
控制器能指出问题，但机柜仍需要直接测试和探头保养，才能证明实际发生了什么。
登录即可将设备信息保存到你的泳池
Automation and Calibration
Automation can reduce friction, but only if sensors, schedules, and freeze logic are maintained like equipment instead of magic.
Use this when
- Automation can reduce friction, but only if sensors, schedules, and freeze logic are maintained like equipment instead of magic.
You'll need
- Controller model
- Firmware version
- Pump model
- Heater model
Stop and escalate if
- Do not use ORP alone as a substitute for direct FC testing
- Do not skip manual fallback documentation
- Do not change interlocks or safety logic without the manual
先做这一步
Map the controller family and confirm sensors are calibrated before trusting schedules, freeze logic, or probe readings.
不要做
- ✕Do not use ORP alone as a substitute for direct FC testing
- ✕Do not skip manual fallback documentation
- ✕Do not change interlocks or safety logic without the manual
准备好
Controller model / Firmware version / Pump model / Heater model
0%0/15 done
1
Map what the controller actually controls
Before you troubleshoot automation, know whether it is commanding pumps, chlorination, heating, valve actuators, sensors, or all of the above.
2
Probe calibration is maintenance
pH probes and similar sensors drift unless they are cleaned, calibrated, and replaced on schedule.
3
Respect ORP limits
ORP can be useful, but its interpretation gets weaker as stabilizer and real-world pool conditions complicate the chemistry.
4
Freeze protection is backup logic
Freeze mode can help in mild climates, but it is not a substitute for true winterization where outage risk or sustained freezes exist.
5
Keep manual control available
Every automated pool needs a sane manual fallback path.
资源（17）
Owner vs pro boundaries
Use the escalation guide when automation work reaches live relays, service menus, or safety-critical freeze and heater logic.
Mixed-brand automation, heaters, and winterization
Use the mixed-brand control guide when the controller, pump, heater, valves, or chlorination are split across different equipment families.
Chemical feeders and automation interactions
Use the feeder-interaction guide when ORP, pH probes, feed commands, and pump schedules are producing unstable chemistry.
Manufacturer manuals and model-family index
Use the family index before changing schedules, freeze settings, or probe workflows on a controller.
Solar roof loop troubleshooting
Use the solar-loop guide when a controller scene or actuator is steering roof-panel flow.
Manual library
Browse the manual library when you want source documents instead of chasing vendor links.
Pool glossary and core terms
Use the glossary when automation, ORP, GFCI, or hydrostatic language needs a plain-English jump point.
Pentair IntelliCenter Control System installation guide
Current IntelliCenter install guidance and system setup reference.
Pentair IntelliConnect install guide
Install guide for the control and monitoring system.
Pentair IntelliChem manual
The manual states IntelliChem senses pH and ORP and dispenses chlorine, bromine, muriatic acid, or CO2 gas.
Hayward Omni configuration guide
The configuration guide states OmniLogic controls up to 16 variable-speed pumps and supports optional sanitization.
Hayward Omni configuration guide
The guide states OmniPL controls up to 8 variable-speed pumps and includes salt-ready model variants.
Hayward Omni configuration guide
The guide states OmniHub controls up to 3 variable-speed pumps and uses a smart relay/controller pad.
Jandy AquaLink TCX Power Center installation and operation manual
The manual covers the TCX power center and installation/operation details.
Jandy AquaLink RS control panel installation manual
The installation manual is the archived local reference for the RS control panel family.
Jandy TruSense owner's manual
The owner manual states TruSense measures pH and ORP and covers installation details.
Jandy TruDose installation and operation manual
The manual states TruDose measures pH and ORP, adds acid, and can trigger chlorination through AquaPure.
自动化边界
在你记录计划、按手册校准并确认可见硬件状态时，自动化对业主是安全的。只要你进入自己不理解的实时控制硬件或安全逻辑，它就不再安全。
OWNER-SAFE
- ✓ 在更改任何内容之前，先记录计划、防冻设置、控制器系列和连接的设备。
- ✓ 使用新鲜的校准液和文档中的控制器流程来校准探头。
- ✓ 使用手册明确说明的手动覆盖和安全关闭路径。
PRO-ONLY
- ★ 打开带电继电器舱、重新接线执行器、排查线路电压负载，或在没有准确指导的情况下改动加热器和防冻的安全关键逻辑。
- ★ 诊断需要电气测试或控制器主板访问的持续性传感器故障。
- ★ 当泳池、Spa、加热器和加药器的联锁发生不可预测的交互时，调整自动化架构。
STOP NOW
- ⚠ 防冻没有启动正确设备，继电器异常抖动，或者控制器给了错误设备上电。
- ⚠ 下一步需要打开带电面板，或者猜测与安全装置相关的服务菜单选项。
- ⚠ 校准结果不可能成立，硬件状况表明传感器、接线或控制器故障。
Educational guidance only. Verify labels, manuals, local code, and site conditions before acting. Stop for electrical, gas, structural, drain, drowning, injury, emergency, or chemical-mixing risk.