Spring Opening Checklist
Use this when the cover is coming off and you need the pool circulating, tested, cleaned, and safe to evaluate without guessing at chemicals.
- Use this when the cover is coming off and you need the pool circulating, tested, cleaned, and safe to evaluate without guessing at chemicals.
- Free Chlorine
- pH
- Total Alkalinity
- Calcium Hardness
- CYA
- Do not add shock or algaecide before the pump is running and water is circulating
- Do not skip the drain cover and equipment safety inspection
Inspect equipment and test water before adding any chemicals.
- ✕Do not add shock or algaecide before the pump is running and water is circulating
- ✕Do not skip the drain cover and equipment safety inspection
Free Chlorine / pH / Total Alkalinity / Calcium Hardness / CYA
Opening day field checklist
Take this to the pad.
可打印开池检查清单
检查与安全
- □确认排水盖完整并固定牢靠
- □检查电气连接和等电位连接
- □验证 GFCI 正常工作
- □检查围栏、门和安全屏障
设备
- □取下冬季堵头并重新安装排水塞
- □重新连接水泵、过滤器和加热器接头
- □给水泵灌水并检查泄漏
- □记录洁净过滤压力：___ PSI
- □确认多向阀位置
- □确认所有阀门处于正确位置
水
- □加水至撇渣器中线
- □测试前让水泵运行 24 小时
- □测试：FC、pH、TA、CH、CYA
- □记录开池基线数值
- □水泵循环满 24 小时前不要添加化学品
循环后
- □如有需要，先调整 pH
- □按计算器加入初始氯剂量
- □如果 CYA 低于目标值，加入 CYA
- □添加后等待 48 小时再重新测试 CYA
First 15 minutes: keep cover debris out
The fastest way to make opening harder is to dump cover water and decomposed debris into the pool.
Before power: inspect stop conditions
Find winter damage while the system is still quiet and not under pressure.
Restore water level and prime
A test result is not useful until the pool can mix and the pump can move water.
Test once the water has mixed
Opening chemistry starts with a result set, not a shopping list.
Choose the branch from the evidence
A clear pool, cloudy pool, green pool, and broken circulation system should not share one checklist.
Make only the justified additions
Sequential dosing makes the next test meaningful.
First 24 hours: clean, filter, retest
The first day proves whether opening actually stabilized.
资源（1）
Weekly / Monthly / Quarterly Maintenance Routine Packet
A printable owner packet that turns weekly, monthly, and quarterly pool maintenance into one repeatable checklist.
可打印开池检查清单
检查与安全
- □确认排水盖完整并固定牢靠
- □检查电气连接和等电位连接
- □验证 GFCI 正常工作
- □检查围栏、门和安全屏障
设备
- □取下冬季堵头并重新安装排水塞
- □重新连接水泵、过滤器和加热器接头
- □给水泵灌水并检查泄漏
- □记录洁净过滤压力：___ PSI
- □确认多向阀位置
- □确认所有阀门处于正确位置
水
- □加水至撇渣器中线
- □测试前让水泵运行 24 小时
- □测试：FC、pH、TA、CH、CYA
- □记录开池基线数值
- □水泵循环满 24 小时前不要添加化学品
循环后
- □如有需要，先调整 pH
- □按计算器加入初始氯剂量
- □如果 CYA 低于目标值，加入 CYA
- □添加后等待 48 小时再重新测试 CYA
Educational guidance only. Verify labels, manuals, local code, and site conditions before acting. Stop for electrical, gas, structural, drain, drowning, injury, emergency, or chemical-mixing risk.